This article describes in
detail about creating a new customer in MachPanel
MachPanel All versions.
MachPanel Control Server
has been installed, if not then follow below KB article:
http://kb.machsol.com/Knowledgebase/Article/50261
MachPanel Remote Server has been installed, if not then follow below KB
article:
http://kb.machsol.com/Knowledgebase/Article/50262
Also make sure that MachPanel Control Server and MachPanel Remote Server should
be on the same build and that MachPanel Provisioning Service is running on both
servers
Open MachPanel Control Panel Website (You can do it by opening MachPanel Control Server Configuration Studio and then navigating to Configure > Control Panel Website, and then clicking on the URL in it). Log in with the provider credentials
Navigate to Home » Customer Manager » Customers and then click on New Customer.
On the next screen click on Select to select the appropriate provider for this new customer
- Select Host Admin (Provider) if you want to create a new customer under the direct customer for provider.
- Select the Appropriate Reseller customer if you want to create this new customer under the reseller customer.
After selecting the provider or reseller, on the next page all the required information should be filled out for new customer as shown below.
After completing all the requirements click on Add Customer to complete the process for creating a new customer or click Add and Subscribe to Service as per following link:
http://kb.machsol.com/Knowledgebase/Article/50275
To create customers in bulk (Import Customers) using CSV file. Please review details on KB link below:
https://kb.machsol.com/Knowledgebase/50297/Import-customers-or-Bulk-Customer-Creation
Customer, Adding a customer, Create Customer, New Customer.