MachPanel Knowledgebase

Configuring Autodiscover SRV Record for Outlook Connectivity

rehan_waseem — Mon, 11 Aug 2025 09:28:42 GMT

Summary

This article provide information about how to configure auto discover SRV record for Outlook Connectivity.

Applies To

All Versions.

Steps Procedure

Kindly make sure DNS (escpeically autodiscover) is properly configured for your customer organization.

Following is required to have successful autodiscovery:

_autodiscover._tcp.example.com. 3600 IN SRV 0 0 443 mail.example.com.

Please create SRV record as per above format for tenant domain.

SRV Record: Create SRV record in each tenant public DNS zone with given format.

Note: Make Sure you do not have any CNAME with name autodiscover in tenant DNS zone.

After making changes (if they were not already there) give DNS propagation some time and check your outlook connectivity again.

Selling & Managing Domain Name (TLD) Products

mudesira.munir — Sat, 09 Sep 2023 07:12:41 GMT

Summary

This article describes in detail about selling and manage Domain Name (TLD) product in MachPanel.

Applies To

MachPanel all versions.

Pre-requisites

STEP 1: Integrate a Domain Name Registrar MachPanel
STEP 2: Configure a Payment Gateway / Set up Billing currency
STEP 3: Create a Domain Name Product (TLD)
STEP 4: Configure DNS Template
STEP 5: Integrate / Create a DNS Server in MachPanel

A. Provision/Sell a Domain Name (TLD)

Open MachPanel Control Panel Website (You can do it by opening MachPanel Control Server Configuration Studio and then navigating to Configure > Control Panel Website, and then clicking on the URL in it). Log in with the provider credentials.
Navigate to Home » Customer Manager » Customers and then click on Subscribe Service for the customer you want to subscribe a new service.

Select the Billing currency which you selected while creating the service plan.
Select the Domain Name from the Service shown in below snapshot.
For a Prepaid Reseller, you must Subscribe As Reseller for the desired Service in order to re-sell it to your Reseller's customer.

On the next page fill the required information and select order type and mode from dropdown men. Provide "Domain Name" and select TLD.
Add/Associate Addon as required.
Click on Shopping Cart.

On review page click on Next.

Once the order has been saved it will go to the "Service Queue" for execution. You will see RUN for Auto provisioning.

B. Managing Domain Names, Contacts and Group Actions

Under Home >> Customer Manage >> Customers. Click on Customer Number and select Subscription tab. You will see the Domain Name product there.

Navigate to Path: Home >> Service Director > Domain Names

Under Domain Names tab, you will see Group Actions button.

Upload CSV (one domain per line): Select CSV file and click Upload.
Please select domain(s) for group action: Select domain names from selectable to selected column.

Under Operations you can Lock/Unlock selected domain or Cancel Domains.

Expand Change Names Server it will display following:

Name Server 1: Enter the name for Name Server 1.
Name Server 2: Enter the name for Name Server 2.
Name Server 3: Enter the name for Name Server 3.
Name Server 4: Enter the name for Name Server 4.

Click Save button to proceed.

General tab displays important and universal data like subscription id, domain name, billing cycle, status information, domain DNS servers and shows if the domain is locked or free, domain can be locked from here.

WHOIS Lookup: Click this for WHOIS lookup.

You can access, modify or update contact information at the Contacts tab e.g. administrator, registrant, technical & billing contact info etc.

Finally, there is Advanced tab where name servers information can be entered like Name servers, IP address etc.

Settings / Handle DNS

Under Settings tab you can Handle DNS

Creating Shared/Web Hosting Products/Service Plan

mudesira.munir — Sat, 02 Sep 2023 22:21:04 GMT

Summary

This article provides information on how to create Shared/Web Hosting Products/Servivce Plan in MachPanel

Applies To

This applies to all build version of MachPanel.

Shared/Web Hosting Plan Management

MachPanel Supports shared hosting plans provisioning on supported providers. Hosting Plans are created through powerful Service Plan Wizard.

To create a hosting plan, navigate to following path: Home >> Service Plans >> Hosting Products

Click Add New Product button.

When the page loads, you will see the following settings:

Product Type: Select Shared Hosting from the drop-down list.
Control Panel: If you select Shared Hosting or Reseller Hosting product type then you will see this box. It lets you select the control panel you are using for the product provisioning.
Server Group: If you select Shared Hosting or Reseller Hosting product type then you will see this box. It lets you select the server group where this package will be provisioned.
Product Name: Enter the name of your product.
Is Active: Select No if you want to disable this product selling.
Select Package Type: You need to select one of following for package type:
1. Web Hosting
2. DNS Only
3. Database Only
4. Mail Only
Allow Prorate: Select Yes if you want to allow pro-rated billing (applicable only if billing system is in Pro-rate mode).
Associate Addon: You may want to associate addon with this product. Your choices are:
1. Optional
2. Required
3. Suppressed
Associate Domain: Select how you want to associate domains with this product. Your choices are:
1. Optional
2. Required
3. Suppressed
Date: This is date set by the system (not editable).
Enabled For Commission Reseller(s): If you check this option the Customer Product Plan will be enabled for Commission type Resellers. (Visible only if Commission Type Reseller option is enabled in Built-in Module.)
1. All Resellers
2. Select Resellers
Product Comments: Enter any comments you want to associate with this product.

Resources: You need to select Resources as per your requirement. For e.g if you have selected Web hsting in package type, you need to provide all the required required detail related to a website.

If you have selected Database Only then provide details related to Databases.
If you have selected Mail Only then provide details related to Mail.
If you have selected DNS Only then provide details related to DNS

Payment Cycles: This form lets you select Payment Cycles for the plan. You must select at least one payment cycle and payment group. Select the payment cycle and click right arrow button to move it to Selected Cycles list. Select the payment group and click right arrow button to move it to Selected Payment Groups list.

Price Group: This form lets you set prices for the Payment Cycles and Payment Groups you have selected in the previous step. Here you may set:

Setup Price
Price
Discount
Renewal Price
Transfer Price

Enter prices in each box.

Possible Product Upgrade / Downgrade: Here you may configure the upgrade and downgrade behavior of this product.

Associate Addon: This form lets you associate addon with your domain name. Your client may buy these addon using online store or order them through their customer control center.

Click Finish button to complete product setup.

Shared Hosting - DNS Only Hosting

mudesira.munir — Wed, 19 Aug 2020 14:38:54 GMT

Summary

This articles describes in detail about the Integration of DNS Only Hosting (Shared/Web Hosting) and DNS Only Subscriptions and Management.

Applies To

This article applies to MachPanel v6 and above.

Pre-Requisites

MachPanel Control Server has been installed, if not then follow below KB article:
http://kb.machsol.com/Knowledgebase/Article/50261
MachPanel Remote Server has been installed, if not then follow below KB article:
http://kb.machsol.com/Knowledgebase/Article/50262

STEP-1: Integrating DNS Service with MachPanel Web Hosting:

Open MachPanel Control Panel Website (You can do it by opening MachPanel Control Server Configuration Studio and then navigating to Configure > Control Panel Website, and then clicking on the URL in it). Log in with the provider credentials.
Add Web Hosting server Group if not added already. Navigate to Home > Service Director > Web Hosting > Server group and then click on Add Server Group, as we added here in the following Snapshot (e.g: DNS only). For more details click Add Web Hosting Server Group

Now click on Server Group Name, new tab "Web Hosting Servers" will open and you will also see Services in options column.

Click Services in the options menu against the desired server then click on Add Service button.

To add DNS Service to your Hostmatic/Web server, select DNS from the drop down list.

Now, select Provider for the DNS service and provide necessary details such as DNS Settings and Name server for this DNS. Click Save when done, See the snapshot below:

In the Server Settings, by selecting Provider as Microsoft DNS, you have the following window as shown below.

In the Server Settings, by selecting Provider as Simple DNS Plus, you have the following options to fill as shown below.

In the Server Settings, by selecting Provider as Power DNS, you have the following options to fill as shown below.

Hit Test Service for each service and if you get Successful message in Green then integration of that service is successful.

STEP-2: Creating DNS Only Product/Package:

To add a DNS Only - Shared Hosting Product navigate to path: Home >> Service Plans >>Hosting Products. Select Customer Product Listing tab for Customer plan.
Click Add New Product button as shown below:

Now provide basic details such as Server Group, Product name and select Package Type DNS Only.

Under Resources tab, Provide the following field.

Maximum DNS Zones.

Select Payment Cycles and Payment Groups and click Next.
Add Price Group and click Next.
Associate Add-on (if any) and then Finish to create the Package.

STEP-3: Provisioning and Selling of DNS Only - Shared Hosting Plan:

In this step you have to sell and provision the DNS Only Plan to the customer. Select Shared Hosting under "Service".

Select the DNS Only Plan under "Package".

Please review the following KB article for more details on selling and provisioning of services: http://kb.machsol.com/Knowledgebase/Article/50275

STEP-4: Management of DNS Only Subscriptions:

Navigate to following path to manage DNS Only Subscription: Home >> Service Director >> Web Hosting >> Hosting Accounts
Select DNS Only Subscription and Press Manage tab as shown below:

By pressing Manage you have the following options as written below:

Manage
Generate Renewal Invoice
Cancel Subscription
Upgrade
Downgrade
Put on Hold

Select Resources to get the Edit Resources tab as shown below.

By pressing the Edit Resources, you have the following window as shown below.

Now by pressing DNS Zones you have the following tabs.

Create DNS Zones
Import DNS Zones

Now you can also Manage, Remove and Create Reverse Lookup of your DNS zone.

By pressing Manage you can manage DNS Record, SOA Record and Add DNS Record as shown below.

By pressing on SOA record you have the following window as shown below.

Now you can save your updated SOA Record as shown below.

Integrating Simple DNS Plus with MachPanel

mudesira.munir — Mon, 08 Jan 2018 05:38:42 GMT

Summary

This article provides a summary for Integrating Simple DNS Plus with MachPanel .

Applies To

This article applies to MachPanel build v6 and above.

Integrating Simple DNS Plus Service with MachPanel

Open MachPanel Control Panel Website (You can do it by opening MachPanel Control Server Configuration Studio and then navigating to Configure > Control Panel Website, and then clicking on the URL in it). Log in with the provider credentials.
MachPanel supports following providers for DNS Server.

Add Web Hosting server Group if not added already. Navigate to Home > Service Director > Web Hosting > Server group and then click on Add Server Group. For more details click Add Web Hosting Server Group

Now Click on Server Group Name, new tab "Web Hosting Servers" will open and you will also see Services in options column.

Click Services in the options menu against the desired server then click on Add Service button.

To add DNS Service to your Hostmatic server, select DNS from the drop down list. Now, select Provider for the DNS service and provide necessary details. See the snapshot below:

Select Simple DNS Plus as provider.

After Providing all the details click Save.

Hit Test Service for each service and if you get Successful message in Green then integration of that service is successful.

Adding Services to Shared \Web Hosting

mudesira.munir — Tue, 24 Feb 2015 09:05:43 GMT

Summary

This article provides a summary on how to add Web Hosting Services in the Hostmatic Server.

Applies To

This article applies to 5.2.10 and onwards.

Pre-Requisite

Integrate Shared\WebHosting server as per details on the following KB article:

http://kb.machsol.com/Knowledgebase/Article/50283

Add Services to Webhosting

To add Web Hosting Services in the Hostmatic Server, click Services in the options menu against the desired server. then click on Add Service button.

From the Service drop down menu, select the Service you want to add.

To add IIS Service to your Hostmatic server, select Web from the drop down list. Now, select appropriate Provider for IIS service and provide necessary details. See the snapshots below:

To add FTP Service to your Hostmatic server, select FTP from the drop down list. Now, select Provider for the FTP service and provide necessary details. See the snapshot below:

To add MailEnable\SmarterMail service to your Hostmatic server, select Mail from the drop down list. Now, select provider for the mail service and provide necessary details. See the snapshot below:

To add Database Service to your Hostmatic server, select Database from the drop down list. Now, select Provider for the database service and provide necessary details. See the snapshots below:

Important Note: For MySQL 5.7 Latest version of MySQL ODBC connector is 5.3, it is must to install “Microsoft Visual C++ 2013 Redistributable” package.

To add DNS Service to your Hostmatic server, select DNS from the drop down list.
Now, select Provider for the DNS service and provide necessary details. following providers are supported:

If you select Power DNS you will see following settings:

To add SmarterStats Service to your Hostmatic server, select Web Stats from the drop down list. Now, select Provider for the WebStats Service and provide necessary details. See the snapshot below:

Error on Managing Domain for SpamFilters

mudesira.munir — Mon, 08 Dec 2014 05:53:11 GMT

Summary

This article provides you solution to the following Error MSG’s:

ERROR: mx.contoso.com cannot be a destination.
ERROR: Failed to add domain 'newexchangedomain.com'

Applies To

This article applies to MachPanel build version 5.1.12.

Solution

If a customer has set up their DNS and therefore is already pointing to spam experts prior to the account has been created on MachPanel, then spam experts account cannot be created. So the client has to be set up manually within spam experts management portal.

If the customer has not set up their DNS and therefore it is not pointing to spam experts then MachPanel is able to create the spam experts account without issue.

In short, change the DNS settings after the customer has been setup by MachPanel.

How To Add Subnet Pools & DNS Pools in Hyper-V Server?

mudesira.munir — Fri, 21 Mar 2014 04:10:45 GMT

Summary

This article provide a summary for adding Subnet Pools (IP addresses), and DNS Pools in Hyper-V.

Applies To

This article applies to MachPanel build v5.2.22 and above

Pre-Requisite:

First of all integrate VPS(Hyper -V)server, details for integrating VPS are given on the following KB article:
http://kb.machsol.com/Knowledgebase/Article/50316

How to add Subnet Pools?

After the successful integration of Server Group, you can view the options such as Add Group Member, Disable, Edit, Subnet Pool, Remove, etc.

Add Subnet Pool as shown in snapshot.You can also see existing pools in the listing.

You can also add IP Pools in bulk via csv file.

In server group Subnet Pool we have added new fields Like

IP Pool name
Type of Subnet Pool (Public, Private)
Virtual switch selection
IP Addresses
Subnet Mask
Gateway
IP Pool can be assigned to resellers.

Natted IP handling and Mac address available in VPS Private IP Pool.

When the Virtual Machines are provisioned successfully you can manage Networks.

https://kb.machsol.com/Knowledgebase/52398/Virtual-Machine-and-Snapshots-Management

Navigate to Home > Service Director > Virtual Machines Hosting > Virtual Machines > Manage Service
Select Management tab.
Add NIC - Private IP's as shown below from Networks.

Manage MAC address for existing NIC.

How to add DNS Pools?

Similarly you can add DNS Pool for Hyper-V servers.

Save

DNS Templates and Handling DNS

mudesira.munir — Wed, 05 Mar 2014 01:37:06 GMT

Summary

This article provide a summary for creating DNS templates from MachPanel DNS manager and handling DNS (Exchange, SharePoint, CRM, Skype For Business etc.).

Applies To

This article applies to MachPanel all versions.

Managing and Adding DNS Templates

For automatic handling of DNS for Exchange and SharePoint etc. you have to create appropriate DNS Templates for each service.

To add a new DNS template, navigate to Home >> Service Director >> DNS Manager >> DNS Templates and click Add DNS Template button.

In the Template Add tab first add the title of the template in the Template title field. Enter the 'Template Title' and fill in the required fields i.e records name, type, priority and hostname. There are columns as shown below:

*No template creation is done in case of Domain Registration

Name: Specify the name of the host e.g. WWW.
Class: A 16 bit value which defines the protocol family or an instance of the protocol. The normal value is IN = Internet protocol.
Type: There are different types of DNS zone records. These numerous record types give you flexibility in setting up the servers in your domain. The most common types of zone records are:

NS: Name Server records (NS) state the authoritative name servers for the given domain.
An A (Address) record is a "host record" and it is the most common type. It is simply a static mapping of a hostname to an IP address. A common hostname for a Web server is 'www' so the A record for this server gives the IP address for this server in the domain.
An MX (Mail eXchanger) record is specifically for mail servers. It's a special type of service-specifier record. It identifies a mail server for the domain. That's why you don't have to enter a hostname like 'www' in an e-mail address. If you're running SmarterMail (mail server) and IIS (Web server) on the same system (i.e. the same system is acting as both your Web server and e-mail server), both the A record for the system and the MX record would refer to the same server.
A CNAME (Canonical Name) record is an alias record. It's a way to have the same physical server respond to two different hostnames. Let's say you're not only running SmarterMail and IIS on your server, but you're also running WU-FTPD so it also acts as an FTP server. You could create a CNAME record with the alias name 'ftp' so people would use ftp.your-domain.com and www.your-domain.com to access different services on the same server.
TXT: Text information associated with a domain.
SRV: A Service record (SRV record) is a specification of data in the Domain Name System defining the location, i.e. the hostname and port number, of servers for specified services.

     4. Priority: To offer some fail-over protection for e-mail, MX records also have a Priority field (numeric).
     5. Host: Specify IP Address of server where service is provisioned or actual domain name using customization keys..
     6. Options: You can remove form here.

Integrate WebHosting Server & DNS service

Now you need to integrate a Web (Hostmatic Server) and add a DNS Service to the Hostmatic server. Please check the following KB article on how to integrate web hosting.

http://kb.machsol.com/Knowledgebase/Article/50283

Enabling DNS for Exchange

To handle DNS in Saas hosting (Exchange, SharePoint, CRM, Skype For Business etc.) Check the option Handle DNS from servers by selecting the Server Group >> Server>> Edit. See the snapshot below:

Select the check box for Handle DNS in Exchange server settings.

Select primary DNS Server from drop down list. DNS Servers must have been added before in MachPanel WebHosting Module
Select the DNS template for this server
Enter CAS server or CAS array public IP

Validate DNS

To validate DNS go to path: Home > Service Director > Exchange Hosting > Exchange Accounts > Manage Service
Select Mail Domains tab as shown below:

Enabling DNS for SharePoint:

Navigate to Home >> Service Director >> SharePoint Hosting >> Server Groups. Click on the appropriate server to open the desired server list. Then click on 'edit' against the server for which you want to enable automatic DNS handling. Now you will see a check box for 'Handle DNS':

Select primary DNS Server from drop down list. DNS Servers must have been added before in MachPanel WebHosting Module

Enabling DNS for Domain Registration:

Navigate to Home » Service Director » Domain Names » Accounts.
Click on the Settings tab and check the 'Handle DNS' box:

Integrating Web Hosting Services with MachPanel

mudesira.munir — Fri, 24 Jun 2011 05:25:00 GMT

Summary

This articles describes in detail about the integrating MachPanel Automation Module for WebHosting in MachPanel.

Applies To

MachPanel all versions

Pre-Requisites

MachPanel Control Server has been installed, if not then follow below KB article:
http://kb.machsol.com/Knowledgebase/Article/50261

MachPanel Remote Server has been installed, if not then follow below KB article:
http://kb.machsol.com/Knowledgebase/Article/50262

All the required back end servers have been installed e.g IIS, DNS, FTP, Mail Servers etc.

Hosting Panels & Hostmatic Components

Following hosting panel are supported:

Below is the list of services and their providers which MachPanel Automation Module for WebHosting supports:

Web Services
- IIS 6 Server
- IIS 7 Server
- IIS 8 Server
- IIS 10 Server

FTP Services
- Microsoft FTP 6 Server
- Microsoft FTP 7/7.5 Server (Windows 2008 or Windows 2012)
- Microsoft FTP 10 Server (Windows 2016)
- Gene6 FTP Server
- Filezilla FTP Server
Mail Services
- Mail Enable Server
- Merak Mail Server 9.2.1
- Smarter Mail Server 6.x
- Smarter Mail Server 8.x
- SmarterMail 11.x/12.x/13.x
DNS Services
- Microsoft DNS Server
- Simple DNS Plus Server
- Power DNS
Database Services
- SQL Server 2000
- SQL Server 2005
- SQL Server 2008
- SQL Server 2012
- SQL Server 2014
- SQL Server 2016
- MYSQL 5.1 Server
Web Stats
- SmarterStats 4
Protected Folders
- IIS Password

Integrating Plesk in MachPanel

Navigate to Home > Service Director > Web Hosting > Server group and then click Add Server Group.
In Step-1 provide server group name, select provider as "Plesk" and click Next.

In Step-2 provide server information as below and click Finish:
- Plesk Server Name
- Plesk Base URL
- Plesk Login
- Plesk Password
- Plesk Shared IP Address
- Maximum website load
- Current website load

Integrating MachPanel Automation Module for WebHosting in MachPanel

Navigate to Home > Service Director > Web Hosting > Server group and then click Add Server Group.

Enter Server Group name, select Hostmatic Control Server from the Provider drop down list. Then move to next step.

4) Enter the Web Hosting Server Reference ID, IP, local administrator credentials and click Finish.

At this point you have successfully added the Hostmatic Control Server in MachPanel. Now you need to add services in the recently added server. So click on the recently added Hostmatic Control Server group.
You will see the list of Web Hosting Server being added in this Server Group. To add Web Hosting Services in the Hostmatic Server, click Services in the options menu against the desired server. then click on Add Service button.

From the Service drop down menu, select the Service you want to add.

After selecting the service, you will be taken to their respective pages. Fill the required information for the services and save. Add multiple services as per your requirements. Please review following KB article for more details:

http://kb.machsol.com/Knowledgebase/Article/53474

Below is a snapshot of Web, DNS services added in the above Hostmatic Server.

Hit Test Service for each service and if you get below snapshot then integration of that service is successful.

Handling DNS Records and Managing DNS zones

mudesira.munir — Fri, 27 May 2011 02:27:09 GMT

Summary

This article provides information about configuration of DNS Record, Names Server and DNS Zones management.

Applies To

MachPanel Version V.4.2.24 and Onwards

Procedure

For automatic handling of DNS for Exchange and SharePoint you have to create appropriate DNS Templates for each service. For this navigate to Home >> Service Director >> DNS Manager >> DNS Template and then click on 'Add DNS Template':

Enter the 'Template Title' and fill in the required fields i.e records name, type, priority and hostname:

Now the DNS Templates have been created, the only remaining task is to assign the templates to appropriate servers.

Names Server

You can add Names Server Groups.

Provide NS IP addresses.

Managing DNS Zones and SOA Records

You can Import DNS Zones, Add bulk DNS Zones, Bulk delete DNS Zones and Bulk Edit.

Click DNS Import Zone.

Select server, owner & customer and click Get DNS Zone.

Import Bulk DNS Zones:

You can import DNS zones in bulk by providing csv file.

Bulk Delete DNS zones:

You can bulk delete DNS zones by providing csv file.

DNS Record

Under DNS Record, you can Edit & remove DNS zones.

Create new DNS Records by clicking on Add DNS record.

Select DNS record type.

SOA Record

You can also update an SOA record for a DNS zone.

Create A DNS Forward Lookup Zone

fawad.khan — Fri, 14 Nov 2008 03:47:52 GMT

Summary
This articles explains the steps to create a DNS Forward Lookup Zone and a DNS Host Record as an example scenario. You may use different names where appropriate.

Applies To
Domain Name Server (DNS)

Solution

Create a new Forward Lookup Zone
To create a new forward lookup zone:

1. Start the DNS snap-in. To do this, click Start, point to Administrative Tools, and then click DNS.

2. Click the DNS Server object for your server in the left pane of the console, and then expand the server object to expand the tree.

3. Right-click Forward Lookup Zones and then click New Zone. The New Zone Wizard starts. Click Next to continue.

4. New Zone Wizard appears, click Next to continue.

5. Select “Primary Zone” to create a copy of your zone and click Next to continue.

Tip: You can select the check box at the bottom of the New Zone Wizard on a Domain Controller (DC) to store the zone information in Active Directory (AD).

6. From the “Active Directory Zone Replication Scope” dialog box select one of the radial button options or accept the default of “To all domain controllers in the Active Directory domain Name.Com and click Next.

7. From the “Forward or Reverse Lookup Zone” dialog box select Forward lookup zone and click Next.

8. In the Zone Name box, type the name of the zone (for example, type newzone.com), and then click Next.

NOTE: This name is typically the same as the DNS suffix of the host computers for which you want to create the zone.

9. From the “Dynamic Update” dialog box select one of the radial button options or accept the default of “Allow only secure dynamic updates (recommended for Active Directory)” and click Next to compete the task.

10. Click Finish.

11. The new zone is listed under Forward Lookup Zones in the DNS tree.

Create a Host or "A" record

To create a host or "A" record:

1. Start the DNS snap-in.

2. Click the DNS Server object for your server in the left pane of the console, and then expand the server object to expand the tree.

3. Expand Forward Lookup Zones.

4. Under Forward Lookup Zones, right-click the zone that you want (for example, newzone.com), and then click New Host (A).

5. In the Name (uses parent domain name if blank) box, type the name of the host that you want to add.

6. For example, if you want to add a host record for a Web server, type mysite. And In the IP address box, type the IP address of the host that you want to add. For example, type 192.168.1.161.

7. Select the Create associated pointer (PTR) record check box, and then click Add Host.
The host record mysite.newzone.com was successfully created.
Click OK.

8.When you are finished adding hosts, click Done.

9. We must run the ipconfig / flushdns under the command prompt in order for the sites to be accessible

10. When using registry-based configuration, changes are applied to DNS servers only when the DNS Server service is re-initialized. So Restart the DNS,
11. Now you can check the connectivity using the ping command at command prompt.
For example, ping mysite.newzone.com

MachPanel Knowledgebase

Configuring Autodiscover SRV Record for Outlook Connectivity

Summary

Applies To

Steps Procedure

Selling & Managing Domain Name (TLD) Products

Summary

Applies To

Pre-requisites

A. Provision/Sell a Domain Name (TLD)

Open MachPanel Control Panel Website (You can do it by opening MachPanel Control Server Configuration Studio and then navigating to Configure > Control Panel Website, and then clicking on the URL in it). Log in with the provider credentials.

B. Managing Domain Names, Contacts and Group Actions

Creating Shared/Web Hosting Products/Service Plan

Summary

Applies To

Shared/Web Hosting Plan Management

Shared Hosting - DNS Only Hosting

Summary

Applies To

Pre-Requisites

STEP-2: Creating DNS Only Product/Package:

STEP-3: Provisioning and Selling of DNS Only - Shared Hosting Plan:

STEP-4: Management of DNS Only Subscriptions:

Integrating Simple DNS Plus with MachPanel

Summary

Applies To

Integrating Simple DNS Plus Service with MachPanel

Adding Services to Shared \Web Hosting

Summary

Applies To

Pre-Requisite

Add Services to Webhosting

Error on Managing Domain for SpamFilters

How To Add Subnet Pools & DNS Pools in Hyper-V Server?

Summary

Applies To

Pre-Requisite:

How to add Subnet Pools?

How to add DNS Pools?

DNS Templates and Handling DNS

Summary

Applies To

Managing and Adding DNS Templates

Integrate WebHosting Server & DNS service

Integrating Web Hosting Services with MachPanel

Summary

Applies To

Pre-Requisites

Hosting Panels & Hostmatic Components

Integrating Plesk in MachPanel

Integrating MachPanel Automation Module for WebHosting in MachPanel

Handling DNS Records and Managing DNS zones

Summary

Applies To

Procedure

Now the DNS Templates have been created, the only remaining task is to assign the templates to appropriate servers.

Names Server

Managing DNS Zones and SOA Records

DNS Record

SOA Record

Create A DNS Forward Lookup Zone